Smallest Countertop Ice Makers Compared: 4 Space-Saving Picks

Updated September 2026.

The smallest countertop ice maker is not necessarily the model with the lowest width. A machine can look narrow from the front but extend far back on the counter. For a genuinely small kitchen, compare width × depth footprint, height, lid clearance and ventilation space together.

See the smallest-footprint pick on Amazon →

Smallest Countertop Ice Makers at a Glance

Footprint below is calculated from the manufacturer’s listed width and depth. It does not include the additional clearance required by the manual.

Smallest Overall Footprint: Euhomy Pearl L1

Euhomy lists the Pearl L1 at 9.1 inches wide, 11.4 inches deep and 12.6 inches tall. Multiplying width by depth gives it a calculated counter footprint of about 103.7 square inches—the smallest in this comparison by a narrow margin. It is also a nugget-ice machine, with documented output of up to 35 pounds per day.

Best for: people who want chewable nugget ice but cannot spare the counter depth required by larger premium machines.

Keep in mind: small exterior dimensions do not eliminate the need for ventilation and lid-opening clearance. Follow the exact manual rather than fitting it tightly between other appliances.

Check Euhomy Pearl L1 options on Amazon

Smallest Compact Bullet-Ice Pick: Silonn SLIM01

The Silonn SLIM01 measures approximately 8.86 inches wide, 11.81 inches deep and 12.20 inches high. Its calculated footprint is about 104.6 square inches—less than one square inch larger than the Euhomy. Silonn lists up to 26 pounds of bullet ice per day, nine pieces in about six minutes, a carry handle and a self-cleaning function.

Best for: renters who prioritize small dimensions, simple bullet ice and portability over premium ice texture.

Keep in mind: bullet ice is hollow and tends to melt faster than dense cubes. Transfer finished ice to a freezer if you need to store it.

Check Silonn SLIM01 options on Amazon

Best Narrow Bullet-Ice Alternative: Magic Chef MCIM22

Magic Chef publishes dimensions of approximately 9.5 inches wide, 14.1 inches deep and 12.9 inches high for the MCIM22. That equals about 134 square inches of counter surface. It is not the smallest by total area, but its narrow face can fit well between other appliances. The manufacturer lists up to 27 pounds per day, two bullet-ice sizes and nine pieces per cycle.

Best for: narrow counters where a little extra depth is available and a familiar, straightforward bullet-ice design is preferred.

Keep in mind: its 14.1-inch body plus cord and ventilation allowance can use more depth than the front view suggests.

Check Magic Chef MCIM22 options on Amazon

Narrowest Premium Nugget Machine: GE Profile Opal Mini

GE’s 2026 Opal Mini is only 8.6 inches wide, making it the narrowest model in this comparison. However, it is 15.6 inches deep and 14.56 inches high, so its calculated footprint is about 134.2 square inches. The standard Opal Mini is designed to produce up to 34 pounds of nugget ice per day with regular refilling. It brings the Opal ice style to a notably smaller body than the full-size Opal 2.0.

Best for: buyers who want premium chewable nugget ice and need a narrow machine, but can accommodate substantial depth.

Keep in mind: “narrowest” does not mean smallest overall. Check lid movement, cabinet height and the exact configuration because side-tank versions require additional width.

Check GE Profile Opal Mini options on Amazon

What “Smallest” Should Mean in Your Kitchen

Smallest footprint

Multiply width by depth to estimate how much counter surface the machine occupies. This is more useful than width alone when counter space is the main constraint.

Narrowest width

A narrow machine may fit between a coffee maker and wall even if it extends farther back. In this group, the Opal Mini is narrowest, while the Silonn is close behind.

Lowest height

Height matters under cabinets, but the listed height is not the full working height. Top-opening lids need additional space to swing open and remove the basket.

Smallest working footprint

The real operating requirement includes ventilation, the power cord, lid movement, water filling and drain access. Never use exterior dimensions as permission to block the clearances required by the manufacturer.

Compact Ice Maker Checklist

• Measure width, depth and available height.
• Add the manual’s ventilation clearance.
• Check whether the lid can open below the cabinet.
• Confirm access to the reservoir and drain plug.
• Compare basket capacity—not only pounds produced per day.
• Choose bullet or nugget ice before comparing extra features.
• Plan freezer space if you intend to save completed ice.

Do Small Countertop Ice Makers Keep Ice Frozen?

Usually not. Most countertop ice makers are production machines with insulated baskets, not miniature freezers. Ice that remains in the basket melts, and many machines reuse that water. Move ice to a freezer for storage. Our broader guide to the best countertop ice maker for a small apartment explains the capacity and ice-type trade-offs in more detail.

How We Compared the Sizes

We used manufacturer-listed exterior dimensions and calculated width × depth for a consistent surface-area comparison. We did not count advertised daily output as storage capacity, and we did not assume that a narrow machine is automatically the smallest. See our How We Review page for our full research methodology.

Frequently Asked Questions

What is the smallest countertop ice maker in this comparison?

By calculated width × depth, the Euhomy Pearl L1 is smallest at about 103.7 square inches, followed extremely closely by the Silonn SLIM01 at about 104.6 square inches. Your required operating clearance may change which one fits better.

What is the narrowest countertop ice maker?

The GE Profile Opal Mini is the narrowest here at 8.6 inches, but its 15.6-inch depth means it is not the smallest by total footprint.

Are compact nugget-ice makers larger than bullet-ice makers?

Not always. The Euhomy Pearl L1 has a very small published footprint. However, nugget machines are generally more complex, and model-specific cleaning and ventilation requirements remain important.

Can I put a countertop ice maker under a cabinet?

Only if the machine, open lid and required ventilation clearance all fit. Measure the working height rather than the closed-machine height alone.

Bottom Line

The Euhomy Pearl L1 has the smallest calculated footprint in this group, while the Silonn SLIM01 is virtually tied and is the compact bullet-ice value choice. The Magic Chef MCIM22 suits a narrow traditional setup, and the GE Profile Opal Mini is the narrowest premium nugget machine—but its extra depth makes careful measuring essential.

Manufacturer & Reference Sources

• Euhomy Pearl L1 specifications
• Silonn compact bullet ice maker specifications
• Magic Chef MCIM22 specifications
• GE Profile Opal Mini dimensions and product information

Featured photo by Lanju Fotografie on Unsplash.